Diamond Retail Mart Pvt. Ltd. holds commanding position in India's Wall Putty & Gypsum Plaster Industry, being one of the largest manufacturers with a production capacity of over 84,000 tons annually. Our group established in 2007. We have been known as one of the leading manufacturers and suppliers in the domestic market for the best quality of our products. We have a state of the art infrastructure, which is well backed up by advanced technology, tools and machineries with the team of exceptional skill sets, in-depth knowledge about the requirements of the industry
Remove all the loose adhering particles from the surface by using wire brush and potable water. Pre - wet the surface before application to achieve good work ability and higher coverage.
Mix powder to water and not water to powder. Water to plaster ratio is (1 part water and 1.5 part of Gypsum Plaster to be maintained to provide good cohesive workable mix. Mix Gypsum Plaster to water by using electrical hand mixture rod to form uniform lump free paste, install the wooden strip / dhada or install the leveling strip in the area where the ready paste is to be applied. Apply the first coat approx. upto 8 mm to 10 mm of thickness, before the first coat sets rake and cross rake the surface. Fill in any hollow area, Level off and compact the surface, then apply the final finish coat. After complete drying for usually 72 hrs. (Depending on the thickness and humidity), the plain smooth leveled surface is ready for painting application.
Wear eye protection, impervious gloves and protective clothing. Advised to avoid direct eye and skin contact and recommended to keep it out of reach of children.
Once the mix has begun to set, additional dry material should not be added, as performance properties of plaster will get altered, thus affecting work ability, cohesiveness, adhesion and strength. A single coat should not exceed more than 8 mm to 10 mm of thickness. If at all thickness required is more than 8 mm to 10 mm, then plaster is to be applied in multiple coats. Use the material instantly after mixing. The surface on which the material needs to be applied should be in line and levelled. Gypsum Plaster should not be applied on surface which is subjected continuous seepage or dampness.
Decotouch gypsum plaster is available in 2kg, 20kg, 25kg Bag and has a shelf life of 6 Months from the date of manufacturing if stored in a cool and dry location. (As temperature, humidity, water addition and other parameters vary from site to site; the above information should be treated as a general guideline)
|Pot life||25 – 30 minutes|
|Initial Setting Time*||15 – 20 minutes|
|Coverage @ thickness of 10 mm.||20 – 25 Sq. ft./Bag of 25 Kg|
|* Depend upon ambient tempreatrue & atmospheric condition.|